PA6, PA6.6, PA6.6 30GF

HOME / 물성표 / PA6, PA6.6, PA6.6 30GF

PA6, PA6.6, PA6.6 30GF

PA6
I. Physical Properties I. 물리적 특성 Test Method Unit Value
Specific Gravity 비중 ISO 1183 g/㎤ 1.13
Water Absorption 수분 흡수율 DIN 53495 % 3
Max. permissible service temperature 사용온도      
Upper temperature limit 최고 - ℃ 70
Lower temperature limit 최저 - ℃ -40
II. Mechanical Properties II. 기계적 특성 Test Method Unit Value
Tensile Strength at yield 인장강도 ISO 527 MPa 90/45
Elongation at yield 항복점 ISO 527 % -4.5/20
Tensile strength at break 장력 ISO 527 Mpa -
Elongation at break 파단점 ISO 527 % ≥50
Impact strength 충격강도 ISO 179 KJ/m2 o.B.
Izod Impact Strength Izod 충격강도 ISO 179 KJ/m2 9/o.B.
Rockwell Hardness Rockwell 경도 ISO 2039-1 Mpa 160/70
Flexural Strength 굴곡강도 DIN 53505 Mpa 77
Modulus of elasticity 탄성율 ISO 178 Mpa 3000/1000
III. Thermal Properties III. 열적특성 Test Method Unit Value
Vicat softening temp. 연화점 ISO 306 ℃ -
Heat Deflection Temperature 열변형 온도 ISO 75 ℃ 160
Cof. Of linear therm. Expansion 선팽창계수 DIN 53752 K-1X10-4 0.85
Thermal conductivity at 20℃ 열전도도 DIN 52612 W/(m X K) 0.28
IV. Electrical Properties IV. 전기적 특성 Test Method Unit Value
Volume resistivity 체적저항 VDE 0303 Ω*㎝ ≥1013/≥1010
Surface resistivity 표면저항 VDE 0303 Ω -/≥1010
Dielectric constant at 1㎒ 유전율 DIN 53483   3.5/7
Diel. Loss factor at 1㎒ 유전정점 DIN 53483   0.031/0.3
Dielectric strength 유전파과전압 VDE 0303 KV/mm 20-50
Tracking resistance 내 트래킹 저항 DIN 53483   CTI 600
V. Additional Data V. 기타 Test Method Unit Value
Bond ability 접착성 - - +
Friction coefficient 마찰계수 DIN 53375 - 0.38-0.45
Flammability 연소성 UL 94 - HB
UV stabilisation UV 안정성     -

PA6.6
I. Physical Properties I. 물리적 특성 Test Method Unit Value
Specific Gravity 비중 ISO 1183 g/㎤ 1.13
Water Absorption 수분 흡수율 DIN 53495 % 2.8
Max. permissible service temperature 사용온도      
Upper temperature limit 최고 - ℃ 101
Lower temperature limit 최저 - ℃ -30
II. Mechanical Properties II. 기계적 특성 Test Method Unit Value
Tensile Strength at yield 인장강도 ISO 527 MPa 80/60
Elongation at yield 항복점 ISO 527 % 40/150
Tensile strength at break 장력 ISO 527 Mpa -
Elongation at break 파단점 ISO 527 % -
Impact strength 충격강도 ISO 179 KJ/m2 o.B.
Izod Impact Strength Izod 충격강도 ISO 179 KJ/m2 -
Rockwell Hardness Rockwell 경도 ISO 2039-1 Mpa 170/100
Flexural Strength 굴곡강도 DIN 53505 Mpa -
Modulus of elasticity 탄성율 ISO 178 Mpa 3100/2000
III. Thermal Properties III. 열적특성 Test Method Unit Value
Vicat softening temp. 연화점 ISO 306 ℃ -
Heat Deflection Temperature 열변형 온도 ISO 75 ℃ 200
Cof. Of linear therm. Expansion 선팽창계수 DIN 53752 K-1X10-4 0.80
Thermal conductivity at 20℃ 열전도도 DIN 52612 W/(m X K) 0.23
IV. Electrical Properties IV. 전기적 특성 Test Method Unit Value
Volume resistivity 체적저항 VDE 0303 Ω*㎝ ≥1013/≥1010
Surface resistivity 표면저항 VDE 0303 Ω -/≥1010
Dielectric constant at 1㎒ 유전율 DIN 53483   3.6/5
Diel. Loss factor at 1㎒ 유전정점 DIN 53483   0.026/0.2
Dielectric strength 유전파과전압 VDE 0303 KV/mm 30-50
Tracking resistance 내 트래킹 저항 DIN 53483   CTI 600
V. Additional Data V. 기타 Test Method Unit Value
Bond ability 접착성 - - +
Friction coefficient 마찰계수 DIN 53375 - 0.35-0.42
Flammability 연소성 UL 94 - V-2
UV stabilisation UV 안정성     -
※ The physical data contained in this table are typical values. They are obtained on the test specimens under specific conditions and represent average values of a large number of tests. The results obtained on this test specimens cannot be applied to finished parts without reservations, as behavior is influenced by processing and shaping.
이 게시물을
로그인박스 닫기