CAST NYLON + GF (흑색)

I. Physical Properties I. 물리적 특성 Test Method Unit Value
Specific Gravity 비중 ISO 1183 g/㎤

1.30

Water Absorption 수분 흡수율 DIN 53495 % 2.10
Max. permissible service temperature 사용온도      
Upper temperature limit 최고 - 110
Lower temperature limit 최저 - -40
II. Mechanical Properties II. 기계적 특성 Test Method Unit Value
Tensile Strength at yield 인장강도 ISO 527 MPa 89.0
Elongation at yield 항복점 ISO 527 % -
Tensile strength at break 장력 ISO 527 Mpa -
Elongation at break 파단점 ISO 527 % -
Impact strength 충격강도 ISO 179 KJ/m2 -
Izod Impact Strength Izod 충격강도 ISO 179 KJ/m2 -
Rockwell Hardness Rockwell 경도 ISO 2039-1 Mpa -
Flexural Strength 굴곡강도 DIN 53505 Mpa -
Modulus of elasticity 탄성율 ISO 178 Mpa -
III. Thermal Properties III. 열적특성 Test Method Unit Value
Vicat softening temp. 연화점 ISO 306 -
Heat Deflection Temperature 열변형 온도 ISO 75 -
Cof. Of linear therm. Expansion 선팽창계수 DIN 53752 K-1X10-4 -
Thermal conductivity at 20℃ 열전도도 DIN 52612 W/(m X K) -
IV. Electrical Properties IV. 전기적 특성 Test Method Unit Value
Volume resistivity 체적저항 VDE 0303 Ω*㎝ 9.1 x 1013
Surface resistivity 표면저항 VDE 0303 ≥1013
Dielectric constant at 1㎒ 유전율 DIN 53483   3.12
Diel. Loss factor at 1㎒ 유전정점 DIN 53483   0.02
Dielectric strength 유전파과전압 VDE 0303 KV/mm 25
Tracking resistance 내 트래킹 저항 DIN 53483   KB 600
V. Additional Data V. 기타 Test Method Unit Value
Bond ability 접착성 - -  
Friction coefficient 마찰계수 DIN 53375 -  
Flammability 연소성 UL 94 - HB
UV stabilisation UV 안정성      
※ The physical data contained in this table are typical values. They are obtained on the test specimens under specific conditions and represent average values of a large number of tests. The results obtained on this test specimens cannot be applied to finished parts without reservations, as behavior is influenced by processing and shaping.
로그인박스 닫기